- Country of manufactureUkraine
Tehplastina MBS 1-40 mm in rolls GOST 7338-90
AMC - atmosferomaslostoykaya (limited ozone resistance);
TMKCH - thermo-frost-acid-alkali-resistant
MBS - oil and petrol resistant.
1 - plate thickness from 1.0 to 20.0 mm, intended for the manufacture of rubber products used to seal units operating at pressures above 0.1 MPa;
2 - plate thickness from 1,0 to 60,0 mm, designed for the manufacture of rubber products used to seal units operating under pressure up to 0.1 MPa, to prevent friction between metal surfaces, as well as for the perception of single shock loads or as linings, decking.
F - molded plates manufactured by vulcanization in molds on vulcanizing presses;
H - non-shaped plates produced by the vulcanization method in boilers, as well as on continuous vulcanizers.
I - rubber plate
II - rubberized fabric with one or more fabric layers. The number of tissue layers is determined by agreement between the manufacturer and the consumer, taking into account that for every 2 mm of the plate there should be no more than one fabric layer.
From 1mm to 10mm the plate is presented in rolls.
Roll width - 1200-1400 mm
Roll weight - 48-55 kg
The 8mm to 40mm plate is presented in sheets.
sheet size - 500h500mm or 1000mm x 1000mm
Density - 1,4-1,6 g/cm3
Elongation at break - 200%
Tensile Strength - MPa 2.2 Hardness
- 75+/-5 Shore A